• whale-av

    https://github.com/unifiedremote/Docs/blob/master/libs/mouse.md#mousevscroll-amount-
    ...... but not as a "swipe"..... you will need to use two buttons.
    Except maybe using a slider instead of two buttons...... https://github.com/unifiedremote/Docs/blob/master/controls/slider.md
    ....but unsure.
    David.

    posted in Q&A read more
  • whale-av

    Hello.
    IR codes are fairly complex things, and whereas the RC6 and then the "Pronto" format was standard a few years ago there have been a few variations since.
    Originally UR recommended the Keene "IR Anywhere" hardware, and that is what I am still using. The Keene will use Pronto codes sent over IP from the UR server. I have had to keep an old UR app version for learning the pronto codes (V 3.0.23) as changes were made to UR "IR learn" in later versions of the app so that commands could be sent directly to the Phone or Tablet built in "Blaster" in a completely different format.

    The UR server and the app can therefore both send codes for IR transmission, but in different formats, and you would need different versions of the app for each format (for when you need to "learn" codes). I don't know of a translator between these two formats, but it could be done using the two versions of the app and "learning" on one whilst transmitting on the other.

    The app has built in functions that let you choose to which sender the data should go (local or server)........ but I doubt that either have functions for sending directly to a UART on the Rpi.

    However you might be able to send the raw strings as a script.
    Help here......... https://github.com/unifiedremote/Docs ..... but not a lot about IR.

    Google voice is integrated in the Android app in some manner (see the app preferences) but I have never tried to use it and so I don't know its capabilities.
    David.

    posted in General read more
  • whale-av

    Yes it is normal that it says "searching for servers" even when it is connected. Your other (lagging) problems are not normal though.
    "All" in the firewall is ok, but allows a connection to the server from outside your local network....... so a small security risk.
    Does the "status" of the connection look good on the app?
    Does the server log show any errors?
    Is your network connected to the internet? The app needs to connect to Google every now and then to check the licence, and if it cannot connect that can cause problems connecting the app to the server........ (if you have a stand-alone network for example).
    David.

    posted in Server read more
  • whale-av

    I would suggest that you look for (as it works usually, and has worked for you at a point in the past)...
    App running twice? (unlikely).
    Server running twice? (check task manager...... could be started at boot and then again from some start-up options)
    IP conflict.
    Firewall block (unlikely.... but make sure the server has been added to the "private" list).
    Try rebooting your router.

    posted in Server read more
  • whale-av

    You will need "alt" held down while you put "insert"...... the same as if you were actually typing on the keyboard.....
    So you will need something like this for your "action"........

        keyboard.down("alt");
        keyboard.stroke("insert");
        keyboard.up("alt");
    

    David.

    posted in Q&A read more
  • whale-av

    Do you have a Java runtime installed. UR seems to make extensive use of Java Scripts..
    There might be other dependencies missing, but the server has some .dll's bundled, so maybe not.
    David.

    posted in General read more
  • whale-av

    That can be done......
    https://github.com/unifiedremote/Docs/blob/master/libs/script.md

    There is a lot more help.... everything in fact....... on the UR GitHub pages.
    Your UR app (and consequently the sever) will need to be on a network connected to the internet. Licences are checked every 3?(unsure) restarts of the app (checked with Google), so on a closed network they will eventually fail.
    David.

    posted in Q&A read more
  • whale-av

    It seems Microsoft now accept only drivers signed by themselves.
    If you absolutely cannot live without this feature you could try one of these solutions........

    Permanent test mode....
    https://www.howtogeek.com/167723/how-to-disable-driver-signature-verification-on-64-bit-windows-8.1-so-that-you-can-install-unsigned-drivers/

    Registry hack for this driver only......
    https://www.reddit.com/r/Windows10/comments/3f08t6/no_windows_10_drivers_heres_how_to_get_them/

    David.

    posted in Server read more
  • whale-av

    Strange.... but the most likely explanation is that you already had another copy of the server open.
    David.

    posted in Q&A read more
  • whale-av

    I don't think you need to worry about UR. The server is on the Pc..... and the app is a client that only connects to that server.
    David.

    posted in General read more

Internal error.

Oops! Looks like something went wrong!